Subscribe to Our Youtube Channel
Related Manuals for Rose electronics VideoSplitter CAT5
Summary of Contents for Rose electronics VideoSplitter CAT5
- Page 1 ™ VideoSplitter CAT5 with serial/audio option INSTALLATION AND OPERATIONS MANUAL 10707 Stancliff Road Phone: (281) 933-7673 Houston, Texas 77099 WWW.ROSE.COM...
- Page 2 VideoSplitter CAT5™ to be in good working order for one year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below.
- Page 3 FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO-FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer’s instructions may cause interference to radio communication.
-
Page 4: Table Of Contents
TABLE OF CONTENTS Contents Disclaimer ....................1 System introduction ..................1 Features ....................2 Compatibility ................... 2 Package contents ................... 2 Models ......................3 Cabling ......................4 Installation ....................5 Step 1 – Connecting the unit to a CPU video port ......... 5 Step 2 –... -
Page 5: Disclaimer
The VideoSplitter CAT5 is the result of Rose Electronics commitment to providing state-of-the-art solutions for today’s demanding workplace. The VideoSplitter CAT5 has proven to be a valuable investment for any business, big or small, that has a need to distribute a video source to multiple locations. -
Page 6: Features
The VideoSplitter CAT5 unit Installation and operations manual. CPU to VideoSplitter CAT5, audio, serial, and CAT5 cables are usually ordered separately. If the package contents are not correct, contact Rose Electronics or your reseller, so the problem can be quickly resolved. -
Page 7: Models
Figure 1. Models Connectors: Front 6 or 12 RJ45 – CAT5 cable connection. Rear DB25F DB9F (6) Serial in 3.5mm (6) audio out, (1) audio in +5V power adapter jack VIDEOSPLITTER CAT5 INSTALLATION AND OPERATIONS MANUAL... -
Page 8: Cabling
Cabling Unit to CPU cable A CPU cable connects from the VideoSplitter CAT5 Unit to a CPUs video monitor port. Serial and audio models also connect a stereo audio cable and DB9 serial cable to the CPUs audio in/out and serial port. -
Page 9: Installation
5. Applying the power. 6. Adjust the video compensation (if needed). When installing the VideoSplitter CAT5 Unit, locate it as close as possible to the CPU or video source. Keep the CPU cable as short as possible but still give some freedom of movement. Using shorter cables keeps the video noise to a minimum and reduces installation costs. -
Page 10: Step 4 - Applying Power
Refer to the users manual for the remote receiver units for the video adjustment procedures. You can mount the VideoSplitter CAT5 Unit in a CPU rack. When mounting the VideoSplitter CAT5 Unit in a rack, follow the instructions in Appendix C. -
Page 11: Operating Instructions- All Models
VideoSplitter CAT5, split into 6 or 12 video paths and routed via CAT5 cable to the receiver units. The receiver units send the video source to the connected monitors. -
Page 12: Troubleshooting
VideoSplitter CAT5 and for general troubleshooting. If you have any problems or questions concerning the installation, operation or usage of the VideoSplitter CAT5 that is not covered in this manual, please contact Rose Electronics for technical support. -
Page 13: Service Information
This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance, you must first obtain a Return Authorization (RA) number from Rose Electronics or an authorized repair center. This Return Authorization number must appear on the outside of the shipping container. -
Page 14: Safety
The VideoSplitter CAT5 has been tested for conformance to safety regulations and requirements, and has been certified for international use. Like all electronic equipment, the VideoSplitter CAT5 should be used with care. To protect yourself from possible injury and to minimize the risk of damage to the Unit, read and follow these safety instructions. - Page 15 Servicing There are no user-serviceable parts inside these products. Only service- trained personnel must perform any servicing, maintenance, or repair. The user may adjust only items mentioned in this manual. VIDEOSPLITTER CAT5 INSTALLATION AND OPERATIONS MANUAL...
-
Page 16: Appendices
F / 0 C-45 C / 0% to 80% RH Dimensions 6-port model 12-port model 17.0 in 17.0 in 4.2 in 4.2 in 1.75 in 3.5 in Weight 3.75 – 4.00 lbs 5.00 – 5.5 lbs VIDEOSPLITTER CAT5 INSTALLATION AND OPERATIONS MANUAL... -
Page 17: Appendix B. Parts And Cables
1-DB9F to 6-DB9M (Serial loop cable) /AUD Suffix = serial/audio option CAB-CX0000Cnnn* VideoSplitter CAT5 to CPU (DB25M to HD15F) * nnn = 5, 10, 20 feet. ** CAT5 cable available from 25 to 1,000 feet. VIDEOSPLITTER CAT5 INSTALLATION AND OPERATIONS MANUAL... -
Page 18: Appendix C. Rack Mount Instructions
Appendix C. Rack mount instructions To rack mount your VideoSplitter CAT5, secure the mounting brackets to the rack using the appropriate size bolts, nuts and lock washers. The following guidelines should be observed when installing. ο ο Do not exceed the operating temperature of 0 C to 45 Do not block power supply vents or restrict airflow. - Page 20 10707 Stancliff Road Phone: (281) 933-7673 Houston, Texas 77099 WWW.ROSE.COM...
Need help?
Do you have a question about the VideoSplitter CAT5 and is the answer not in the manual?
Questions and answers