Installing The Software On Windows 8 - Blackmagicdesign H.264 Pro Operation Manual

Installation
8
Follow the Desktop Video Setup Wizard prompts
Click "Yes" .
Restart your PC!
Installing the software for Windows
Contents
The Desktop Video software installer will install the following components which are used by H.264 Pro
Recorder:
‚ Blackmagic Desktop Video drivers
‚ Blackmagic Media Express
The Desktop Video software installer will also install the following components which are used by other
Blackmagic Design capture products when installed on the same computer:
‚ Blackmagic Design Control Panel
‚ Blackmagic Disk Speed Test
‚ Blackmagic LiveKey
‚ Blackmagic Multibridge Utility
‚ Blackmagic AVI and QuickTime
‚ Adobe® presets and plug-ins
Desktop Video software
1. The CD supplied with the H.264 Pro Recorder contains the Desktop Video software. Before you
install, ensure you have the very latest driver. Visit www.blackmagic-design.com/support
2. Open the "Desktop Video" folder and launch the "Desktop Video" installer.
3. The drivers will now be installed on your system. An alert will appear: "Do you want to allow
the following program from an unknown publisher to make changes to this computer?"
Click to continue.
Yes
4. You will see a dialog bubble saying "found new hardware" and the hardware wizard will appear.
Select "install automatically" and the system will find the required Desktop Video drivers. You will
then receive another dialog bubble saying "your new hardware is ready for use."
5. Now restart your machine to enable the new software drivers.
codecs
™