Attach The Front Panel - Philips CEM250 User Manual

5
Install the sleeve into the dashboard and
bend the tabs outward to fi x the sleeve.
Note
•
Skip this step if the unit is not fi xed by sleeve but
supplied screws.
6
Place the supplied rubber cushion over the
end of the mounting bolt.
7
Slide the unit into the dashboard until you
hear a click sound.
8
Reconnect the negative terminal of the car
battery.

Attach the front panel

1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
EN 15