Contents 1 Safety 10 Adjust sound 2 Your car audio system 11 Adjust system settings Introduction What's in the box 12 Others Overview of the system Reset Replace fuse 3 Install the car audio system Connect wires 13 Product information Mount into the dashboard Attach the front panel 14 Troubleshooting...
1 Safety Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. • This apparatus is designed for negative ground (earth) 12 V DC operation only. •...
.m4p, .mp4, and .aac) WMA files in lossless format Congratulations on your purchase, and What's in the box welcome to Philips! To fully benefit from the support that Philips offers, register your product Check and identify the contents of your at www.philips.com/welcome.
Overview of the system n m l k j i d Disc slot • Unlock the front panel. e LCD screen • Press to return to the previous menu. • Eject the disc from the disc • Press and hold to access the system compartment.
• For .wma and .mp3 tracks, press to • Start, pause, or resume the play of access the folder list. tracks. • In radio mode, press to select the • In radio mode, press to select the preset radio station of No. 6. preset radio station of No.
• Tune to a radio station. • Press to skip to the previous or next track. • Press and hold to rewind a track or search fast forward. • Press to hang up an ongoing call. • When there is an incoming call, press to reject it.
3 Install the car Connect wires audio system Note • Consult a professional to connect CEM2300BT as instructed below. Caution • Use the controls only as stated in this user manual. Check the car's wiring carefully and connect them to the the male connector.
Connect the antenna and amplifier as Mount into the dashboard illustrated, if applicable. If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. • If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lose its memory.
Install the sleeve into the dashboard and Slide the unit into the dashboard until you bend the tabs outward to fix the sleeve. hear a click sound. Note • If the unit is not fixed by sleeve but by the supplied screws, skip this step.
4 Get started For the first time use Note • Select correct country/region for this unit, otherwise the unit can not work properly. Detach the front panel Press to turn the unit on. » [SELECT OPERATING REGION] is displayed. Note Rotate to select an option: •...
Switch music listening zone » The radio station is broadcast. • To search for a radio station automatically, Philips’ innovative Zone technology enables press driver or passengers to enjoy music with the best speakers balance and experience more Select tuner region vivid spacial effect as the artist is intended to create.
6 Play from hard Select tuner sensitivity media To receive more radio stations or only stations with strong signal, you can adjust the tuner sensitivity. Press and hold . You can use this system to listen to audios that repeatedly until [LOCAL] is Press are stored on a compatible disc or USB storage displayed.
Press repeatedly to select a play mode: • [SHUF FLD]: start random play for all tracks in the current folder. • [SHUF ALL]: start random play for all tracks. • [SHUF OFF]: cancel shuffle play. Connect a compatible USB storage device. Switch tracks Press AS/SOURCE repeatedly to switch the source to [USB].
On your device, follow the steps below. Press Search for Bluetooth devices. » [WAIT] is displayed with -, --, In the device list, select CEM2300BT. and --- blinking alternately until Enter the default password "0000", and [CONNECTED] scrolls or [FAILED] then confirm the password entry.
Pick up an incoming call Play audio from a Bluetooth device When the system receives an incoming call, the phone number or [PHONE IN] is displayed. Press to answer the call. If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the Reject an incoming call device through the system.
8 Listen to an 9 Charge your external player USB device You can use the system to amplify the audio You can charge your USB device, for example, input from an external player, for example, MP3 smart phone, with this product. player.
10 Adjust sound 11 Adjust system settings The following operations are applicable to all supported media. Press to access system settings. Button Function Press repeatedly until one of the Rotate to increase or decrease the following settings scrolls. volume level. [BEEP TONE], [DIMMER], [DEMO], •...
12 Others [BLACK [BKO 10 S] Turn off OUT] the screen automatically 10 seconds after last operation. Reset [BKO 20 S] Turn off the screen You can reset the unit to its default setting. automatically 20 seconds Detach the front panel. after last Press the reset button by using a ball-point operation.
13 Product information Note • Product information is subject to change without prior notice. General Power supply 12 V DC (11 V - 16 V), negative ground Fuse 15 A Note Suitable speaker 4 - 8 • If the new fuse gets damaged again, there may be an impedance internal malfunction.
Preset stations lost. requesting service. If the problem remains • Battery cable is not correctly connected. unsolved, go to the Philips Web page (www. Connect the battery cable to the terminal philips.com/support). When you contact the that is always live.
15 Notice The paired mobile phone connects and disconnects constantly. • The Bluetooth reception is poor. Move the mobile phone closer to the system or Any changes or modifications made to this remove any obstacle between the mobile device that are not expressly approved by phone and the system.
Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. CEM2300BT_55/85_UM_V2.0...