Install Remote Control Battery; Turn On; Set Clock - Philips CEM250 User Manual

3
Press the left side of the panel and point
the left hole at the left pillar.
4
Release the panel to engage the left side.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
•
Risk of decreased battery life! Never mix different brands
or types of batteries.
•
Risk of product damage! When the remote control is not
used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.

Turn on

1
Press to turn on the unit.
16 EN
• To turn off the unit, press
seconds.

Set clock

1
Press MENU / DISP for 3 seconds.
2
Press or repeatedly until the currently
time is displayed.
3
Turn clockwise to set hour.
4
Press to confi rm.
5
Turn anti-clockwise to set minute.
6
Press to confi rm.
View clock
1
Press MENU / DISP repeatedly until the
clock is displayed.
for 3