Installation (Snp-3120) - Samsung SNP-3120 User Manual

Hide thumbs Also See for SNP-3120:
Table of Contents

Advertisement

installation & connection

INSTALLATION (SNP-3120)

On-ceiling installation
1. Drill a hole of 60mm diameter on the ceiling
and run the wires down through it.
2. Install the Mount Bracket onto the hold and
fix it using 4 screws.
J
Do not connect the camera to a power outlet
until the installation is complete. Supplying power
in the middle of the installation may cause fire or
damage the product.
3. Connect each camera cable to the proper
terminals on the bottom of the camera. For
more detailed instructions, please refer to
Page 16:"Camera Wiring Interface Board".
4. DIP switches for communication and ID setup
are located on the bottom of the camera. For
more instructions, please refer to Page 22.
28_ installation & connection

Advertisement

Table of Contents
loading

This manual is also suitable for:

Snp-3120vhSnp-3120v3120v3120vh

Table of Contents