Driving Position Memory System - Acura 2009 TSX Owner's Manual

Driving Position Memory System

U.S. TSX and Canadian TSX Premium
Your vehicle has a memory feature
for the driver's seat position.
Two seat positions can be stored in
separate memories. You select a
memorized position by pushing the
appropriate button or using the
appropriate remote transmitter
(Driver 1 or Driver 2).
This setting can be linked or
unlinked with the remote transmitter.
To switch the link setting, see page
93 .
142
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page
134
SET BUTTON
3. Press and release the SET button
). on the control panel. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
position of the driver's seat is now
stored.
MEMORY BUTTONS