Check Belt Routing Path
1. Move the PTO clutch lever to ON. Verify the belt has been routed
Check Belt Guards and Gap
Inspect the four belt guards on the PTO
clutch assembly. Verify each guard is
positiioned
shown.
as
Check the spacing between the the
pulleys and the four belt guards. Verify
-
there is a gap of 1/8
3/16"
18
ENGINE CRANKSHAFT PULLEY
TWIST IN BELT ON
RIGHT SIDE PULLE
two
-5 mm).
(3
as shown.
FIXED (LEFT SIDE) PULLEY
-
20
23
ft-lb.
-
31 Nrn)
(27
RIGHT SIDE
\\- -
REAR VIEW
MOVEABLE (RIGHT SIDE) PULLEY
POP
52152 (9610)