Table of Contents
Advertisement
Technician notes
In this section
Warnings, cautions, and notes .................................................................................................................. 4
Where to go for additional help ................................................................................................................ 4
Warnings, cautions, and notes
WARNING: Only authorized technicians trained by HP should attempt to repair this equipment. All
troubleshooting and repair procedures are detailed to allow only subassembly/module-level repair.
Because of the complexity of the individual boards and subassemblies, no one should attempt to
make repairs at the component level or to make modifications to any printed wiring board. Improper
repairs can create a safety hazard.
WARNING: To reduce the risk of electric shock, personal injury, and damage to the equipment:
Do not attempt to service any parts of the equipment other than those specified in the following
procedure. Any other activities may require that you shut down the server and remove the power
cord.
Installation and maintenance of this product must be performed by individuals who are
knowledgeable about the procedures, precautions and hazards associated with the product.
WARNING: To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.
CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of clearance at
the front and back of the server.
CAUTION: The server is designed to be electrically grounded (earthed). To ensure proper operation,
plug the AC power cord into a properly grounded AC outlet only.
NOTE: Any indications of component replacement or printed wiring board modifications may void
any warranty.I
Where to go for additional help
In addition to this guide, information about software drivers and utilities is available on the HP ProLiant
Networking Software CD that shipped with the adapter.
HP updates networking software frequently to include new functionality and features. For the latest driver,
firmware, and documentation updates go to the HP website
(http://h18004.www1.hp.com/products/servers/networking/index.html).
Technician notes 4
Advertisement
Table of Contents
