Specifications; Cx4 Twin-Axial Cable; General Specifications; Compliance - HP NC510C User Manual

Specifications

In this section

CX4 Twin-axial cable.............................................................................................................................. 10

General specifications ............................................................................................................................ 10

Compliance........................................................................................................................................... 10

Power and environmental specifications.................................................................................................... 11
CX4 connector pinout description............................................................................................................. 11
CX4 Twin-axial cable
The NC510C adapter uses a 10Base-CX4 copper interface to deliver Gigabit Ethernet over four twin-
axial copper cable pairs as specified in the IEEE 802.3ak standard. For troubleshooting and other
information about cabling, see the CX4 connector pinout description (on page 11).
General specifications
General
specifications
Controller
Data rate
PCI bus
Cable connector
Cable distance
Dimensions (LxW)
Compliance
Compliance
IEEE
Safety
Emissions
Value
NETXEN NX2031
10 Gbps, full-duplex
8 Lane (x8) PCI Express, compatible with x4 and x8 bus widths
4x InfiniBand® (SFF-8470)
15 meters with CX4 x4 twin-axial cable
6.6 x 2.5 in (16.5 x 6.4 cm) without bracket
Standard
802.1p (QoS), 802.1Q (VLANs), 802.3ae (10 Gigabit Ethernet), 802.3ak (CX4),
802.3x (flow control)
UL Mark (US and Canada)
EN 60950
FCC Class A, VCCI Class A, BSMI Class A, CISPR 22 Class A, ACA Class A,
EN55022 Class A, EN55024-1, ICES-003 Class A, MIC Class A
Specifications 10