Technician Notes; Where To Go For Additional Help - HP NC373F User Manual

Hewlett-packard pci express multifunction gigabit server adapter user guide
Hide thumbs Also See for NC373F:
Table of Contents

Advertisement

Technician notes

In this section

Where to go for additional help ................................................................................................................ 4

WARNING:
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module-level repair. Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs can create a safety hazard.
WARNING:
equipment:
WARNING:
CAUTION:
clearance at the front and back of the server.
CAUTION:
operation, plug the AC power cord into a properly grounded AC outlet only.
NOTE:
void any warranty.
Where to go for additional help
Go to the HP website (http://www.hp.com).
1.
Click Software & Driver Downloads from the left menu bar.
2.
Only authorized technicians trained by HP should attempt to repair this
To reduce the risk of electric shock, personal injury, and damage to the
Do not attempt to service any parts of the equipment other than those specified in the
following procedure. Any other activities may require that you shut down the server and
remove the power cord.
Installation and maintenance of this product must be performed by individuals who are
knowledgeable about the procedures, precautions and hazards associated with the
product.
To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of
The server is designed to be electrically grounded (earthed). To ensure proper
Any indications of component replacement or printed wiring board modifications may
Technician notes 4

Advertisement

Table of Contents
loading

Table of Contents