Washer Installation - Crosley Compact Two speed automatic washer Use And Care Manual

W I
ASHER NSTALLATION
E R
LECTRICAL EQUIREMENTS
wWARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
P -
ORTABLE ONE
NOTE: Make sure the lid is closed before
moving the washer.
•
Use the hose connector provided with the washer
for a one-faucet connection.
•
Set the Temperature Selector to Warm/Warm or
to Warm/Cold.
•
Attach the hose connector to the faucet adapter by
pulling down on the locking collar while lifting up
on the connector until it snaps into place.
•
Slowly turn the water faucet on all the way.
•
Pull the electrical power cord from the storage
area in the back of the washer. Plug the power
cord into a 3 prong grounded outlet.
Water temperature adjustment:
Adjust water temperature as follows:
•
Wash Water: Adjust faucets for wash water
temperature prior to the fill for wash.
•
Rinse Water: Adjust faucets for temperature prior
to fill for rinse.
NOTE: Always use cold rinse water for permanent
press fabrics.
FAUCET CONNECTION
A 120-volt, 60-Hz., AC-only, 15-or 20-ampere fused
electrical supply is required. Time-delay fuse or circuit
breaker is recommended.
GROUNDING INSTRUCTIONS
For your personal safety, this washer must be
grounded. Check with a qualified electrician or
serviceman if you are in doubt as to whether the
appliance is properly grounded. Do not modify the
plug provided with the appliance - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
Faucet adapter
Locking collar
Water flow
button
Hose connector
5