Honda 2006 Odyssey Owner's Manual page 165

To install the stowable plus-one seat,
hook the front of the seat to the floor,
then push down the back until it
locks. Make sure both the front and
back of the seat are securely latched.
Pull up the seat-back, and adjust the
seat-back angle to the desired
position while pulling the seat-back
angle adjustment strap on the
outside of the seat bottom.
Install the seat cushion on the seat
bottom plate. To install the cushion,
hook the front of the cushion first,
then push down the rear until the
cushion is securely positioned.
To use the plus-one seat as a center
console, remove its seat cushion by
pulling up the seat cushion strap.
Then pivot the seat-back forward
until it is flat. Store the seat cushion
in the floor storage area.
ANGLE ADJUSTMENT STRAP
To remove the seat, lower the head
restraint all the way down. Remove
the seat cushion by pulling the strap
on the seat cushion, and fold the
seat-back forward.
CONTINUED
Seats
161