Honda 2006 Odyssey Owner's Manual page 111

Position Setup
When ''MEMORY POSITION
LINK'' is set to ''ON,'' the driver's
seat moves to the position stored in
memory when you open the driver's
door after unlocking it with the
remote transmitter.
Refer to page 165 to set the seat
position memory. Also refer to page
139 for remote transmitter use.
Memory Position Setup
While the multi-information display
shows ''POSITION SETUP,'' press
the SEL/RESET button on the
steering wheel. The display changes
to ''MEMORY POSITION LINK'' as
shown above.
Multi-Information Display
Press the SEL/RESET button. The
display changes as shown above.
Each time you press the INFO
button, the lower display changes
between ''MEMORY POSITION
LINK ON'' and ''MEMORY
POSITION LINK OFF,'' and then to
''EXIT.''
CONTINUED
107