Table of Contents
Advertisement
Installing the Linux Driver
2. Enter the following command:
3. Reboot the system.
For GRUB, perform the following steps:
1. Append the max_scsi_luns parameters to each of the kernel images listed in
2. Reboot the system.
Driver Command Line Parameters
The following command line options are available:
Proc Filesystem Support
The /proc file system for the QLA2300 driver can be found in the
/proc/scsi/qla2300/ directory. This directory contains a file for each SCSI HBA in
the system. Each file presents information about the adapter and transfer statistics
for each discovered LUN.
30
FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation
#lilo
the /etc/grub.conf file. For example:
kernel /vmlinux-2.4.7-10 ro root=/dev/hda2 max_scsi_luns=128
Verbose —This option provides detailed debug information. For example:
# insmod qla2300.o options = verbose
Waiting for LIP to complete....
scsi%d: Topology - %s, Host Loop address 0x%x
scsi(%d): LIP occurred
scsi(%d): LIP reset occurred
Quiet—This option keeps the driver from displaying. For example:
# insmod qla2300.o ql2xopts = quiet
Guide
Advertisement
Table of Contents
