Table of Contents
Advertisement
Installing the Adapter
Installation Prerequisites
Before you begin, make sure you have the following:
Adapter Components
Figure 1
1
2
LED Indicators
1.
J1 Connector
2.
Figure 1: Adapter Components
18
FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation
A screwdriver (Phillips #1).
An optical multimode cable with an LC-style duplex connector.
Each HBA has a unique serial number that is located on the bottom of the
adapter. Check the HBA and record its serial number, in the unlikely event
that the NVRAM is corrupted.
shows the HBA components that are referenced throughout this chapter.
3
J3 Jumpers
3.
Guide
Advertisement
Table of Contents
