Table of Contents
Advertisement
If you are adding additional HBAs to the system, or if you are installing the
FCA2214DC, Windows detects another device when the system reboots. The
Found New Hardware with FCA2214 PCI Fibre Channel Adapter message
displays. Perform the following steps to complete the driver installation:
1. When the Insert Disk message displays, make sure the CD-ROM is inserted
2. Click Finish in the Found New Hardware Wizard/Completing the Found
3. The following message displays:
4. Click Yes.
5. Repeat
FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation
Guide
and click OK.
New Hardware Wizard screen.
Your hardware settings have changed. You must restart your
computer for these changes to take effect. Do you want to
restart your computer now?
step 1
through
after installing the driver for the last HBA.
step 4
for any additional HBAs. Make sure to reboot
Installing the Windows Driver
33
Advertisement
Table of Contents
