Motor Assembly Parts List - RIDGID MS1060 Owner's Manual

Repair Parts
WARNING: For your safety, this miter saw is specially insulated. To reduce the risk of electrical shock, fire or
injury, use only parts identical to those identified in the parts list. Reassemble exactly as originally assembled.
Key
Part No.
No.
1 828736 Screw Pan Cr Pt K60 x 75mm
2 828720 Handle Carry
3 808380-5 * Screw Pan Cr #8 Plastite
4 828718 Handle Upper
5 828717 Actuator Switch
6 826053 Spring Compression
7 828719 Handle Lower
8 826064 Cap Motor Housing
9 354653 Bumper
10 826017 Holder Brush
11 826016 Brush
* Standard hardware - may be purchased locally
WARNING: These items are important to the safety of this tool. Do not substitute common parts.
• WARNING: Any attempt to repair or replace electrical parts on this unit may create a hazard unless
repair is done by a qualified service technician. Repair service is available from authorized RIDGID Ser-
vice Center.
Parts List For RIDGID 10" Compound Miter Saw
Model No. MS10600
RIDGID parts are available on-line at www.ridgidparts.com
Figure 2 - Motor Assembly
Always order by Part Number — Not by Key Number
Description
Key
Part No.
No.
12 826453
13 805549-22
14 826163
15 826062
16 823322
17 823417
18 829512
19 828716
20 826066
21 828735
22 803709-1
31
Description
Screw Pn Hd 10-32 x 2-1/4
* Washer 13/64 x 3/8 x 1/32
Cap Grip
Lock Arbor
Spring Arbor Lock
Seal
Motor Asm
Button Lock
• Switch SPDT
• Cord w/Plug
Connector Wire