Vacuum Mode: Assembly; Place The Crevice/Brush Combo Tool On The Tool Holder On The Main Body Of The Unit. (Fig; Www.sharkclean.com - Shark VAC-OR-STEAM MV3010 Owner's Manual

Vacuum Mode: Assembly

Fig. 1
ASSEMBLY
1 Insert the handle into the body. Use a
screwdriver (not included) to secure the handle
assembly in place with the screw provided.
(Fig. 1)
MV3010_40_ENG_IB_120703_1.indd 3
Fig. 2
Fig. 3
ATTACHING THE VACUUM NOZZLE
1 Place the main unit on top of the vacuum nozzle
and press down to make sure that the vacuum
nozzle is firmly secure to the vacuum body.
(Fig. 2) You will hear an audible click when the
two parts are attached correctly.
2 Place the crevice/brush combo tool on the tool
holder on the main body of the unit. (Fig. 3)
3 Wrap the power cord around the cord holders
and secure the plug to the cord (a). (Fig. 4)
a
Fig. 4

www.sharkclean.com

12-07-03 9:15 AM
3