Unpacking Your Dryer; Basic Requirments - Samsung DV456 Series User Manual

installing your dryer

uNpACkING YOuR DRYER

Unpack your Dryer and inspect it for shipping damage. Make sure you have received all of the items
shown below. If your Dryer was damaged during shipping, or you do not have all of the items, contact
1-800-SAMSUNG (726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the dryer.
Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene,
etc.) well out of childrens' reach
WARNING
Do not move the product while holding the front part of the top cover of the dryer.
- This may cause the cover to be separated and result in injury.
CAUTION
Tools needed
pliers
level

bASIC REquIRmENTS

Make sure you have everything necessary for proper installation
• A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
• A POWER CORD for electric dryers (except in Canada).
• GAS LINES (if installing a gas dryer). The gas lines must meet national and local codes.
• EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.
Control panel
Top Cover
Filter
Frame Front
Cutting knife pipe wrench (gas only)
phillips screwdriver
[ bACK ]
door
duct tape
installing your dryer _9
duct exhaust
Nut drivers
Wrench