Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Diamond Digital DX-D193P
Summary of Contents for Diamond Digital DX-D193P
- Page 1 DIAMOND DIGITAL DX-D193P Colour TFT LCD Monitor 19” (43 cm) LCD Panel Size...
- Page 2 Copyright 2008, Mitsubishi Electric Australia Pty. Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission.
-
Page 3: Table Of Contents
CONTENTS Safety Disclaimer Important Safety Instructions Introduction Before Installing Your Monitor Unpacking Precautions Exploded View Front Panel Configuration Bottom Panel Configuration Side Panel Configuration Tilt / Swivel Angle Dimension Production Description Supported Timing Table Installing the Monitor Ventilation Desktop Installation Connecting the Composite Video to the Monitor Connecting the Y/C(S-Video) Signal to the Monitor Connecting the YPbPr Signal to the Monitor... -
Page 4: Safety
1 Safety 1.1 Disclaimer This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify an person of such revision or changes. -
Page 5: Introduction
2 Introduction 2.1 Before Installing Your Monitor Thank you for choosing our new generation DX-D193P monitor. This lightweight, slim design LCD monitor includes many outstanding features and combines the benefit of a high resolution display. Please follow ALL instructions and cautions carefully before using this product. Keep this user manual safely stored for future reference. -
Page 6: Exploded View
3 Exploded View 3.1 Front Panel Configuration Figure 3.1 Front Panel function description of DX-D193P Ref # Button Function Description Press to switch monitor on / off. POWER Green: Power on ; Orange: No signal ; Red: Power saving ;... -
Page 7: Bottom Panel Configuration
3.2 Bottom Panel Configuration Figure 3.2 Bottom Panel function description of DX-D193P Input /Output Interface Ref # Connector Description PC Audio In For audio source of R.G.B input terminal. Component Connect to component input, such as the video output of a (YPbPr) DVD player. -
Page 8: Side Panel Configuration
.3 Side Panel Configuration Figure 3.3 Side Panel function description of DX-D193P Input /Output Interface Ref # Connector Description Connect to th e output / input terminal of video equipment, BNC2 In/Out such as a VCR or a color video camera... -
Page 9: Tilt / Swivel Angle
3.4 Tilt / Swivel Angle The viewing angle of the monitor can be adjusted to the most comfortable monitoring status. Min Degree Max Degree 5 degree 40 degree 3.5 Dimension... -
Page 10: Production Description
4 Product Description The DX-D193P TFT-LCD Security Monitor with Protective Glass displays PAL colour pictures in CCTV systems. There are 2 sets of Composite Video BNC connector inputs/outputs, 2 sets of RCA audio input/outputs, 1 set of L/R RCA Audio inputs for Component (YPbPr) and 1 S-Video (Y/C) input and output using a 4-pin mini-DIN. -
Page 11: Installing The Monitor
5.3 Connecting the Composite Video Signal to the Monitor The DX-D193P TFT-LCD Security Monitor with has 2 sets of BNC connectors located on the rear side of the monitor for composite video input/outputs. All video inputs are passive loop-through when operating in a single connection mode. -
Page 12: Connecting The Y/C(S-Video) Signal To The Monitor
5.4 Connecting the Y/C (S-Video) Signal to the Monitor There is 1 set of mini-DIN type connectors for the S-Video (Y/C) input/output on the rear side panel (see Figure 3.3). 5.5 Connecting the YPbPr Signal to the Monitor There is 1 set of YPbPr connectors for the S-Video (Y/C) input/output on the rear side panel Connect the signal cable to the connectors with same colors (green/blue/red) 5.6 Connecting Audio to the Monitor There are 3 sets of stereo audio connectors and 1 stereo mini-jack for audio input located on the rear side... -
Page 13: Navigating The Monitor
6 Navigating the Monitor 6.1 Navigating the Monitor On-screen Display(OSD) The DX-D193P TFT-LCD Security Monitor has several modes: Composite1/2, YPbPr, VGA, DVI and S-Video. The LCD monitor is programmed through the on-screen display (OSD) menus and submenus where an operator can select operating parameters. -
Page 14: Vga/Dvi Signal Osd Menu
6.2.1 VGA/DVI Signal OSD Menu Main Menu Sub Menu _ PIP/POP * Above Value/data is for reference only. Change without notice. -
Page 15: Vga/Dvi Signal Osd Function Table
6.2.2 VGA/DVI Signal OSD Function Table Main Menu REF.# Menu Definition Brightness Adjusts the brightness level (range 0-100) Contrast Adjusts the contrast level (range 0-100) H-Position * Adjust the left or right position of the screen image (range 0-100) V-Position * Adjust the up or down position of the screen image (range 0-100) Clock *... -
Page 16: Video(Composite/Ypbpr/S-Video) Signal Osd Menu
6.2.3 Video(Composite/YPbPr/S-Video) Signal OSD Menu Main Menu Sub Menu *Above value/data is for reference only. Change without notice. -
Page 17: Video(Composite/Ypbpr/S-Video) Signal Osd Function
6.2.4 Video(Composite/YPbPr/S-Video) Signal OSD Function Table Main Menu REF.# Submenu Definition Brightness Adjusts the brightness level (range 0-100) Contrast Adjusts the contrast level (range 0-100) Tint Adjust the colour tint. (NTSC only) (range 0-100) Color Adjust the colour density (range 0-100) Color Press (+) or (-) to choose three types of colour temperature 9300°K , 6500°K or Temp. -
Page 18: Input Signal Icon
6.2.5 Input Signal Icon VGA Signal Composite Signal S- Video Signal DVI Signal YPbPr Signal 6.2.6 Hot Key Icon Contrast Adjustment Brightness Adjustment Volume Adjustment... -
Page 19: Troubleshooting Guide
7 Troubleshooting Guide Problem Solution No image is displayed on – Check that the power cord of the monitor is securely connected to the wall outlet or grounded extension cable or strip. screen – Power switch should be in the ON position and the LED illuminated. “No Signal”... -
Page 20: Technical Specifications
8 Technical Specification Model DX-D193P Monitor Size 19 inch with protective screen Pixel pitch (H x V mm) 0.294 x 0.294 Max. VGA / DVI 1280 x 1024 pixels /85 Hz Resolution Dimension (W x H x D mm) 421.2 x 408.8 x 240... -
Page 21: Warranty
WARRANTY WARRANTY After Sales Service After this product is unpacked, keep the carton and packing materials to ensure safe transportation in case of any after sales service. The warranty is covered by a 3-year limited warranty, subject to normal conditions of use. If you experience any problems with this product please contact your local dealer or supplier for repair and maintenance instructions. -
Page 22: Service Contacts
Service Contacts Australian Service Contacts Visit the Customer Support page of Mitsubishi Electric Australia’s web site at; www.mitsubishielectric.com.au Further details of your nearest Mitsubishi Electric Authorized Service Center or to contact a Mitsubishi Electric Service Representative in your state or territory: New South Wales and Australian Capital Territory 348 Victoria Road Rydalmere, NSW, 2116...
Need help?
Do you have a question about the DX-D193P and is the answer not in the manual?
Questions and answers