Asus A7V133-VM User Manual page 32

3. HARDWARE SETUP
12) Standard and Consumer Infrared Module Connector (5 pin IR)
This connector supports an optional wireless transmitting and receiving infrared
module. This module mounts to a small opening on system cases that support
this feature. You must also configure the setting through UART2 Use Infrared
(see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for
use with COM2 or IrDA. Use the five pins as shown in Back View and connect
a ribbon cable from the module to the motherboard's SIR connector according
to the pin definitions.
A7V133-VM
®
A7V133-VM Infrared Module Connector
32
IR
1
ASUS A7V133-VM User's Manual
Front View Back View
+5V
IRTX
GND (NC)
IRRX