Assembly And Set-Up - Razor Ecosmart metro 13114501 Owner's Manual

ASSEMBLY AND SET-UP

q Attaching the Basket
2 1
1
Slide the basket hooks (1) under
the bar located on the luggage rack.
Turn power switch "OFF" before conducting any maintenance procedures.
q Adjusting the Brakes
Tools required: 10mm open wrench
1
To adjust the brake cable play, thread the
brake lever adjuster in or out 1/4 to 1/2 turn until
the desired brake adjustment is attained. Most
adjustments are complete at this step. If brake still
needs further adjustment, proceed to step 2.
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code located on the white label on your product or back of charger available for better assistance.
1
2
2
Align the hole in the basket (2)
with the hole on the luggage rack (1).
2
If the brake is too tight or too
loose, use a 10mm open wrench to
loosen the nut for additional adjust-
ment on the brake cable. Securely
tighten the nut when finished.
3
Insert the washer and bolt into
the hole in the basket and through
the bracket on the luggage rack.
Using a 5mm Allen wrench, tighten
the bolt until the basket is securely
attached to the rack.
4
WARNING:
Do not exceed weight limit of 11lbs
(5kg) on luggage rack.
WARNING:
The carrier should not be used to
carry people or pets.
WARNING:
The brake is capable of skidding
the rear tire and throwing an
unsuspecting rider. Practice in an
open area free from obstacles
until you are familiar with the
brake function. Avoid skidding to a
stop as this can cause you to lose
control and/or damage the rear tire.