Pride Quantum Litestream XF Owner's Manual page 28

I V . C O M F O R T A D J U S T M E N T S
To adjust the dual-post armrest height:
1. Rotate the release lever that is located on the
armrest in either direction. See figure 38.
2. Move the armrest up or down to the desired height.
3. The release lever is spring-loaded and will
automatically release.
4. Make sure the armrest latches into place.
5. Repeat the procedure for the other side if
necessary.
Seat Angle (Dump) Adjustment
The position of the caster wheels affects the angle
(dump) of the seat. By changing the location of the
caster wheel on the fork, you change the seat angle.
See figure 39.
NOTE: You can also adjust the seat angle by raising
or lowering the drive wheel. See "Drive Wheel Adjust-
ment."
To change the seat angle:
1. Remove the hardware that fastens the caster wheel
to the caster fork.
2. Reposition the caster wheel on the caster fork.
3. Reinstall the hardware that fastens the caster
wheel to the caster fork.
4. Repeat the procedure for the other side, making
sure both caster wheels are adjusted to the same
position.
WARNING! Changing the seat angle may
adversely affect stability and cause the
wheelchair to tip over.
28
Figure 38. Dual-post Armrest Height Adjustment
Figure 39. Caster Wheel Position
www.pridemobility.com
RELEASE LEVER
CASTER FORK
CASTER
WHEEL
Litestream XF