Advertisement
Windows 95 SR2
Requirements
• HP Vectra with Windows 95 SR2 installed.
• 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.
• Vectra VL8 Driver Name: W95EL5X9.INF Size: 16KB Date: 6/11/97
• Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96
• Vectra VE7/VE8 Driver Name: W95EL5X9.INF Size: 16KB Date: 6/11/97
• Windows 95 SR2 media.
• Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX,
Device Configuration
I/O Base Address
Interrupt Request
• Boot PROM
• Transceiver Type
• Network Driver Optimization
• Maximum Modem Speed
• Plug and Play Compatibility
• Full Duplex
Procedure
1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B
2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.
3 Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM's
4 Select "CONFIGURE NIC," and verify the resource settings listed above
and NWLink NetBIOS transfer protocols.
Vectra VL8
210
10
Level
adapter card into an ISA slot.
website) and execute 3C5X9CFG.EXE.
under the heading "Device Configuration."
1 Connecting to a Netware 3.12 Server
Vectra VL7
Vectra VE7/VE8
210
300
10
10
Disabled
Auto Select
Windows or OS/2 Client
9600 Bps
Disabled
Disabled
Windows 95 SR2
Advertisement
