• If you experience problems receiving the time calibration signal in your area, it
probably is best to switch between Standard Time and Daylight Saving Time
(summer time) manually.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A until the city code of the currently selected
Home City flashes in the upper left display. This is the setting mode.
2. Press C once. This will display the DST setting screen.
3. Use D to cycle through the DST settings in the sequence shown below.
Auto DST (
4. When the setting you want is selected, press A to exit the setting mode.
• The DST indicator (
Daylight Saving Time is on.
E-44
)
DST off (
) is shown at the bottom of the upper left display when
)
DST on (
)