Advertisement
5. After all of the settings are the way you want, press A to exit the setting screen.
•
The DST indicator will be on the upper display while daylight saving time is turned on.
Note
•
After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ appears in the
upper display.
When you release A (after ADJ appears), city code will be
•
fl ashing in the upper display.
2. Press C.
•
This will cause the DST indicator to appear in the upper display
and the DST setting of the currently selected Home City to appear
in the upper display.
3. Press D to toggle the DST setting between daylight saving time (ON) and standard time (OFF).
4. After all of the settings are the way you want, press A to exit the setting screen.
•
The DST indicator will be on the upper display while daylight saving time is turned on.
E-16
2. Press C to move the fl ashing in the sequence shown below to select the other settings.
12/24-Hour
City Code
DST
Format
Illumination
Button Operation
Duration
Tone On/Off
•
The following steps explain how to confi gure timekeeping settings only.
3. When the timekeeping setting you want to change is fl ashing, use D and/or B to change it as
described below.
Screen
To do this:
Change the city code
Toggle between daylight saving time (ON) and
standard time (OFF).
Toggle between 12-hour (12H) and 24-hour (24H)
timekeeping.
Reset the seconds to 00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Change the hour or minutes
Change the year, month, or day
E-18
Hand Home Position Adjustment
Strong magnetism or impact can cause the hands of the watch to be off.
•
Home position adjustment is not necessary when the analog time and digital time are the same time in
the Timekeeping Mode.
To adjust home positions
1. In the Timekeeping Mode, hold down A and keep it depressed for
about fi ve seconds until H.SET appears on the upper display.
When you release A after H.SET appears, the second hand will
•
move to 12 o'clock. This indicates the second hand home position
adjustment mode.
•
Though ADJ will appear in the upper display about two seconds
after you hold down A, do not release the button yet. Keep it
depressed until H.SET appears.
•
Home position adjustment is performed in the following sequence:
second hand, current time hour and minute hand, World Time hour
and minute hand, mode hand.
E-20
Taking Temperature Readings
This watch uses a temperature sensor to measure temperature.
To take temperature readings
While in the Timekeeping Mode, press D.
Temperature
Temperature
•
TEMP will appear in the upper display and temperature measurement
will start. After about one second, the measurement reading will
appear in the upper display.
•
The watch will continue to take temperature readings every fi ve
seconds for about two minutes.
•
The watch will return to the Timekeeping Mode after the reading
operation is complete (about two minutes).
Press D to restart temperature readings.
•
Pressing C while a reading operation is in progress will stop the
•
operation and enter the Timekeeping Mode.
Temperature
•
Temperature is displayed in units of 0.1°C (or 0.2°F).
•
The displayed temperature value changes to - - - °C (or °F) if a measured temperature falls outside the
range of –10.0°C to 60.0°C (14.0°F to 140.0°F). The temperature value will reappear as soon as the
measured temperature is within the allowable range.
E-22
Operation Guide 5446
Seconds
Hour
Minutes
Day
Month
Year
Do this:
Use D (East) and B (West).
Press D.
Press D.
Press D.
Use D (+) and B (–).
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-20).
To change the current time and date settings
1. In the Timekeeping Mode, hold down A until ADJ appears in the
City code
City code
upper display.
When you release A (after ADJ appears), city code will be fl ashing
•
in the upper display.
4. After all of the settings are the way you want, press A to exit the setting screen.
Note
•
For information about selecting a Home City and confi guring the DST setting, see "Confi guring
Home City Settings" (page E-15).
•
While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from
noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,
time is displayed from 0:00 to 23:59, without any P (PM) indicator.
•
The watch's built-in full automatic calendar makes allowances for different month lengths and leap
years. Once you set the date, there should be no reason to change it except after you have the
watch's battery replaced.
•
The day of the week changes automatically as the date and/or year changes. Make sure that your
date and year settings are correct.
•
Refer to the pages shown below for more information on Timekeeping Mode settings.
- Button operation tone on/off: "To enable or disable the button operation tone" (page E-40)
- Illumination duration setting: "To change the illumination duration" (page E-36)
2. Use C to select the hand (s) you want to adjust.
•
The selected hand (s) will move to 12 o'clock, and the upper display and lower display will show
the information below.
Upper display
Lower display
Selected hand
H.SET
Flashing 00
Second hand
Flashing 0:00
Not displayed
Hour and minute hands
Flashing SUB
Flashing 1
World Time hour and minute hands
Flashing SUB
Flashing 2
Mode dial hand
•
If the selected hand does not move exactly to 12 o'clock, perform step 3 below to adjust it.
•
The watch will return to regular timekeeping automatically if you do not perform any operation for
about two or three minutes. Any changes you have made to settings up to that point will be saved.
3. Use D (+) and B (–) to adjust the position of the currently selected hand.
•
Holding down either button will cause the hand to move at high speed. Once started, high-speed
hand movement will continue even if you release the button. To stop high-speed hand movement,
press any button.
•
The second hand and mode dial hand will automatically stop high-speed movement after they
complete one revolution. The minute hand will stop automatically after 12 revolutions.
4. Press A to exit home position correction and return to regular timekeeping.
Note
After performing home position adjustment, check to make sure that the analog hands and the upper
display indicate the same time. If they do not, perform home position adjustment again.
Display Units
You can select either Celsius (°C) or Fahrenheit (°F) for the displayed temperature value. See "To specify
the temperature unit" (page E-25).
Temperature Sensor Calibration
The temperature sensor built into the watch is calibrated at the factory and normally requires no further
adjustment. If you notice serious errors in the temperature readings produced by the watch, you can
calibrate the sensor to correct the errors.
Important!
•
Incorrectly calibrating the temperature sensor can result in incorrect readings.
Carefully read the following before doing anything.
– Compare the readings produced by the watch with those of another reliable and accurate thermometer.
– If adjustment is required, remove the watch from your wrist and wait for 20 or 30 minutes to give the
temperature of the watch time to stabilize.
E-17
E-19
E-21
E-23
Hide quick links:
Advertisement
