HP PROBOOK 4530S Maintenance And Service Manual page 77

Notebook pc
Hide thumbs Also See for PROBOOK 4530S:
Table of Contents

Advertisement

10.
To remove the top cover, pull up on the top of the top cover (1), pull upward on the left (2) and
right sides (3), and then lift the bottom of the top cover (4) to remove it enough to access the
card reader cable underneath.
11.
Lift the front of the top cover slightly to gain access to the cable and connector underneath.
12.
Lift the connector latch (1), disconnect the card reader cable (2), and then lift the top cover from
the computer (3).
Reverse this procedure to install the top cover.
Component replacement procedures
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents