Optical Drive - HP PROBOOK 4530S Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
For use in 4530s models:
Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive
Blu-ray ROM DVD±RW SuperMulti DL Drive
DVD±RW and CD-RW SuperMulti DL Combo Drive
DVD-ROM Drive
For use in 4730s models:
Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive
Blu-ray ROM DVD±RW SuperMulti DL Drive
DVD±RW and CD-RW SuperMulti DL Combo Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the bottom door (see
Remove the optical drive:
1. Position the computer upside-down with the battery bay toward you.
2. Remove the Phillips PM2.5×5.0 screw (1) that secures the optical drive to the computer.
3. Push the optical drive tab (2) to release the optical drive from the computer.
50 Chapter 4 Removal and replacement procedures
Battery on page 47).
Bottom door on page 49).
Spare part number
647951-001
647952-001
647950-001
647949-001
647955-001
647956-001
647954-001
647953-001