Power Button Board - HP PROBOOK 4530S Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for PROBOOK 4530S:
- Quickspecs (55 pages) ,
- Frequently asked questions manual (25 pages) ,
- Brochure (4 pages)
Table of Contents
Advertisement
4.
Lift the side of the board (3), slide it out from under the tab, and then remove the board from the
top cover (4).
Reverse this procedure to install the Quick Launch board.
Power button board
Description
Power button board for use in model 4530s
Power button board for use in model 4730s
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Bottom door (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the power button board:
74
Chapter 4 Removal and replacement procedures
Battery on page
47).
Bottom door on page
Optical drive on page
Keyboard on page
63)
Top cover on page
65)
49).
50)
Spare part number
646294-001
646295-001
Hide quick links:
Advertisement
Table of Contents
