Mode Switch; Daily Job Flow; About Help Guidance; Set Date/Time/Tax Table - Casio SE-S400 Quick Start Manual

Preparations
Note: Please follow the steps described below.
4. To set date, time and tax table
1.
As soon as the power socket is plugged in, the
display shows the language selection display. Choose
language and country by using ? or >
F
press key.
2.
Display changes to date and time setting display.
Moving the input area (reversed area) by ?
keys, input date, month, year and time from ten key
pad. Input the time by 24 - hour system. For example,
F
1356 for 1:56 pm. After then press
Australian model, the setting is completed by this step
To set Australian GST, please see the next section.
3.
Display then changes to tax table setting screen.
Using ten key pad, input tax rates. You can set four
kinds of tax rates.
MA1302-A

5. About help guidance

1.
When you have any problem to operate or program
your cash register, press /
keys then
2.
The register prints items of guidances.
3.
Enter the number you need help from ten key pad and
press / key.
4.
Follow the printed instruction.
You can download "Setting tool" from the following
or >
websites.
Deutsch http://www.casio-b2b.com/ecr/de/support/
Français http://www.casio-b2b.com/ecr/fr/support/
key. For English http://www.casio-b2b.com/ecr/euro/support/
Nederlands http://www.casio-b2b.com/ecr/nl/support/
UK :http://www.casio-b2b.com/ecr/uk/
For other countries, please ask your CASIO dealer.
Getting to know your cash
register

Mode switch

key.
PGM
Program key
The Program key marked PGM can select any position of
the Mode switch while Operator key marked OP can select
only OFF, REG, or CAL positions.
PGM
OP key -
PGM key
¡
1 PGM (Programming)
This position is for setting your cash register to suit the
needs of your store.
2 RF (Refund)
Use this position to correct registered items.
3 OFF
The cash register turns off in this position.
4 REG (Register)
This position is for normal transactions.
5 X (Read)
This is the position used for issuing daily sales totals
report without clearing the data.
6 Z (Reset)
This position is for issuing reports of daily totals with
clearing the accumulated totals.
7 X2/Z2
This position is used to print periodic sales reports.

Daily job flow

Before opening your store
Mode switch
OP
While the store is open
Operator key
RF OFF REG X Z X2/Z2
- - - -
¡ ¡
¡ ¡ ¡ ¡ ¡ ¡
After closing the store
• Please see page E-22 on SE-S400.
• Please see page E-25 on SE-C450.
• Plugged in?
• Enough paper roll?
• Date and time are correct?
• Enough small change in the drawer?
• Registrations
• Issuing latest total sales report if
needed.
• Issuing day's total sales report.
• Withdraw the money from the drawer.
After you withdraw all the money
from the drawer, we recommend that
you leave the drawer open when you
leave your store.
• Turn the Mode switch to OFF.