Table of Contents
Advertisement
3.
Remove the subwoofer (4) and cables.
Reverse this procedure to install the subwoofer and cables.
Display assembly
NOTE:
The display assembly includes a webcam, two microphones, and wireless antenna
transceivers and cables.
Description
17.3-in, AntiGlare, FHD, LED display assembly in aluminum finish
17.3-in, AntiGlare, FHD, LED display assembly in steel gray finish
17.3-in, BrightView, HD+, LED, LVDS display assembly in steel gray finish
17.3-in, BrightView, HD+, LED, LVDS display assembly in regular finish
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
Battery on page
52), and then remove the following components:
Optical drive on page
Hard drive on page
56)
WLAN module on page
Keyboard on page
65)
53)
62)
Component replacement procedures
Spare part number
656295-001
656296-001
654442-001
639397-001
103
Advertisement
Table of Contents
