Table of Contents
Advertisement
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
●
System board (see
●
Fan/heat sink assembly (see
Remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2), until you hear a click.
Battery on page
52), and then remove the following components:
Optical drive on page
Hard drive on page
56)
WLAN module on page
Keyboard on page
65)
Top cover on page
68)
System board on page
Fan/heat sink assembly on page
53)
62)
87)
91)
Component replacement procedures
97
Advertisement
Table of Contents
