Dymo LabelManager 500TS Quick Reference Manual page 15

Dymo labelmanager 500ts label maker
Hide thumbs Also See for LabelManager 500TS:
Table of Contents

Advertisement

Safety Precautions for Lithium Polymer Rechargeable Battery Pack
Inaccurate handling of a Lithium Polymer rechargeable battery may cause
leakage, heat, smoke, an explosion, or fire. This could cause deterioration of
performance or failure. This may also damage the protection device installed in
the battery pack. This could damage equipment or injure users. Thoroughly
follow the instructions below.
While Charging the Battery
Danger
When charging the battery, use dedicated chargers and follow the specified
conditions.
Do not connect directly to an electric outlet or cigarette lighter charger.
Do not use or store battery close to fire or inside the car where temperature may be
over 60°C.
Warning
Stop charging the battery if charging is not completed within the specified time.
Caution
Thoroughly read this Quick Reference Guide before charging the battery.
Do not charge in a place that generates static electricity.
Battery can only be charged within 0°C~45°C temperature range.
When Discharging the Battery
Danger
Use the battery only in the specified equipment.
Do not use or store battery close to fire or inside the car where temperature may be
over 60°C.
Caution
Do not charge in a place that generates static electricity.
Battery can only be used within -20°C~60°C temperature range.
15

Advertisement

Table of Contents
loading

Table of Contents