Do you have a question about the 5500 and is the answer not in the manual?
Questions and answers
Walter Brown
February 5, 2025
does not print after new batteries installed
1 comments:
Mr. Anderson
May 14, 2025
If the Dymo 5500 does not print after new batteries are installed, it may be because the batteries are not properly inserted according to the polarity markings, or the printer settings were lost if the AC adaptor was disconnected incorrectly. Another reason could be a printer jam, indicated by "!!!!!!!!" on the display.
Introduction The Display The Dymo 5500 Electronic Labelmaker enables you to create a wide variety of high quality self-adhesive labels 1234567890123456 of up to 88 characters. The Labelmaker uses 6mm ( "), 9mm ( "), 12mm ( ") USER or 19mm ( ") wide tape cassettes in a number of label...
Page 3
• Press and hold to scan quickly through the text. MULTI-LINE PRINTING • Press to start the next line of text on a multi-line • Press to move the cursor to the label, e.g. beginning or end of the line of text. This is a two line label in the display will be •...
• press to fix the new length and print the label. PERSONALISED (USER) SYMBOLS PRINT • To cancel the fixed length and restore the automatic You can store up to nine frequently used symbol LENGTH characters in the memory and recall a personalised length, press followed by SIZE...
Need help?
Do you have a question about the 5500 and is the answer not in the manual?
Questions and answers
does not print after new batteries installed
If the Dymo 5500 does not print after new batteries are installed, it may be because the batteries are not properly inserted according to the polarity markings, or the printer settings were lost if the AC adaptor was disconnected incorrectly. Another reason could be a printer jam, indicated by "!!!!!!!!" on the display.
This answer is automatically generated