Advertisement
1. Connect a coaxial cable to your input source (cable box or
antenna). To connect more than one input source to the
amplifier, use a high isolation A/B switch or video selector
to switch between inputs.
2. Connect the coaxial cable from your input source (cable
box or antenna) to the amplifier's INPUT terminal.
3. Connect one end of a coaxial cable to your output device
(TV, cable modem, etc.) and the other end to the amplifier's
OUTPUT terminal.
4. Connect the supplied AC adapter to the jack on the right
side of your amplifier.
5. Plug the AC adapter into a standard AC outlet. The
amplifier's red LED lights when it has power.
6. Turn on the device connected to the amplifier.
7. Adjust GAIN MIN/MAX to get the best picture.
Specifications
Forward Path:
Operating Frequency Range
...................................................................................
Gain
Gain Adjustment Range
Reverse Path:
Operating Frequency Range
................................................................................
Insertion Loss
Adapter Input Voltage
................................................................................
Power Usage
Power Line Frequency
Dimensions (H×W×D)
. ......................................................................
Weight
Specifications are subject to change and improvement without notice.
Actual product may vary from the images found in this document.
..........................................
.................................................................
...............................................
........................................................
. .............................................................
...........1½ × 3¾ × 5½ in
5
54 to 1000 MHz
Up to 10 dB
5 to 40 MHz
105 to 135V
50-60 Hz
(3.81 × 9.53 × 13.97 cm)
6.72 oz (190.51 g)
8 dB
5 dB
<2W
Advertisement
