• To keep exposed cable to a minimum, you can also place
the amplifier in your attic.
• To prevent interference, do not place the amplifier within six
inches of any other electronic device.
2
Route cables
Route a 75-ohm (RG-6 or RG-6QS) coaxial cable (not supplied)
from the amplifier to your input source and receiver. Follow
these hints when routing cable:
• Use only as much cable as is necessary to reach from the
amplifier to the input source and receiver.
• Do not route cables where they might be cut, crimped, or
crushed by normal activities.
• For best appearance, route the cable through the attic and
walls, and terminate in a wall mount box with an F-connector
(not supplied).
3
Connect devices
INPUT
OUTPUT
4
Power LED
GAIN MIN/MAX