Connecting To A Tv Or Audio System - Toshiba SD-P90DTSE Owner's Manual

Connections

Connecting to a TV or audio system

You can enjoy various disks by connecting the player to your TV or an audio
system.
For details of output sound, see
Connecting to a TV
• Make the following setting.
On-screen display Select:
"Audio Out Select" "Analog 2ch"
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• Connect the player directly to your TV. If you connect the player to a VTR, TV/VTR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
• When an NTSC disc is played, the AV OUT jack outputs NTSC signal to a connected TV.
To select AV mode of the player
Press MODE button on the player.
Each time the button is pressed, the
LCD will change as below.
NORMAL
AV-OUT
AV-IN
DTV
54
07SD-P90DTSE_E_EU_P53-61
.
41
To AV OUT
To audio
Audio/video
inputs
cable (supplied)
To video
input
Page
46
49
NORMAL: Outputs video and audio to the LCD
AV-OUT:
AV-IN:
DTV:
Note
•To view disc playback on the LCD of the player, select
"NORMAL".
54
Signal flow
(red)
TV or monitor with
audio/video inputs
(white)
(yellow)
of the player only.
Select this to output to an external device
such as a TV connected to the player.
Inputs video and audio from an
external device such as a VCR
connected to the LCD of the player,
thus allowing you to view video on
the LCD of the player.
Select this to watch DIGITAL TV.
07/3/23, 11:14