Connecting To A Tv Or Audio System; Connecting To A Tv - Toshiba SD-P1600 Owner's Manual

Connections

Connecting to a TV or audio system

Connect the player to your TV or audio system.
For details of output sound, see

Connecting to a TV

• Make the following setting.
On-screen display
"Digital Out"
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• Connect the player directly to your TV. If you connect the player via a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
To switch between LCD screen/AV-IN/AV-OUT
Press MODE button on the player.
Each time the button is pressed, the
LCD screen will change as below.
AV-IN
AV-OUT
54
SD-P1600_E_P53-61
.
40
Audio/video
cable (supplied)
Select: Page
46
"Analog 2ch"
49
NORMAL
54
To AV OUT
To audio inputs
(white)
To video input (yellow)
NORMAL: Outputs video and audio to the LCD
of the player only.
AV-IN: Inputs video and audio from an
external device such as a VCR
connected to the LCD of the player,
thus allowing you to view video on
the LCD of the player.
AV-OUT: Select this to output to an external device
such as a TV connected to the player.
Note
• NORMAL will be set the next time the player is turned on
even if you turn the power of the player off while AV-IN or AV-
OUT is set.
05.1.14, 10:42 AM
Signal flow
(red)
TV or monitor with
audio/video inputs