Connecting To An Audio System And Tv Equipped With Component Video Inputs - Toshiba SD-P2000 Owner's Manual

INTERLACED outputs/inputs (ColorStream
Some TVs or monitors are equipped with component video
inputs. Connecting to these inputs allows you to enjoy
higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, C
C )
R
In some TVs or monitors, the color levels of the playback
picture may be reduced slightly or the tint may change. In
such a case, adjust the TV or monitor for optimum
performance.

Connecting to an audio system and TV equipped with component video inputs

AV IN AV OUT
To AV OUT
Switching the output signal
(INTERLACED/PROGRESSIVE)
Video signals of both interlace and progressive
scanning formats are output from the player's
COMPONENT VIDEO connector. Press the MONITOR
button on the main unit repeatedly and select the type
of output signal according to the scanning format of the
connected TV.
25
MONITOR Select "External Interlaced" or "External
Progressive".
Notes
• Refer to the owner's manual of the connected equipment as well.
• When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player away
from the tuner and radio.
• The output sound of the player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the player's power cord. If you leave the amplifier power on, the
speakers may be damaged.
®
)
COMPONENT S VIDEO
VIDEO
BITSTREAM/PCM
To COMPONENT VIDEO
Component video cable
(supplied)
To audio inputs
of the amplifier
PROGRESSIVE outputs/inputs (ColorStream
Some TVs or monitors are equipped with component video
inputs that are capable of reproducing a progressively
scanned video signal. Connecting to these inputs allows
you to view the highest quality pictures with less flicker.
,
B
BATTERY DC IN 12V
To C
B
To C
R
To Y
(white)
(red)
When the AV OUT or BITSTREAM/PCM jacks are
connected to the audio input terminals of an audio
system, sounds of discs can be heard on the connected
audio system. For instructions on connections to audio
systems, see page
®
Pro)
Signal flow
TV equipped
with component
video inputs
Audio system
.
72
• Make the following setting.
On-screen display Select:
"Bitstream"
"Audio Out Select"
or
"PCM"
Page
72
69