Wireless Lan Test Program (Atheros) - Toshiba QOSMIO F30 Series Maintenance Manual

3.27 Wireless LAN Test Program (Atheros)

3.27 Wireless LAN Test Program (Atheros)
This section describes how to perform the wireless LAN transmitting-receiving test with the
test program.
NOTE: Use another computer (with Atheros 11a/g(MB44ag)/Atheros 11a/g(MB62HL))
that can communicate by the wireless LAN as a responder machine to perform
this test.
The computer must be booted by the Responder T&D.
In this test, the following items are tested:
(1) SKU check of Module
(2) MAC Address Check
(3) Communication test of 11a mode
(4) Communication test of 11b mode
(5) Communication test of 11g mode
(6) SKU & MAC Check,11a/b/g communication test
To start the Wireless LAN test program, follow the steps below:
NOTE: Before starting the wireless LAN test, make sure the Wireless Communication
Switch on the left side of the computer is turned on. (The Wireless
Communication LED lights orange.)
QOSMIO F30 Maintenance Manual (960-555)
3 Tests and Diagnostics
[CONFIDENTIAL] 3-65