Replacing The Bottom Case; Figure 2-20. Example Of Serial Number Label - HP OmniBook 6000 Service Manual

Replacing the Bottom Case

Installation Procedure
1. Install a new Microsoft Product ID label.
2. Transfer the old serial number label and install a new overlay, or create a new serial number label
using the steps below.
3. Follow the "Reassembly Notes" on page 2-23.
Installing a New Serial Number Label
Download the latest version of the serial number label template (Microsoft Word format) from the
Partnership Web site (see page vi) under Support/Service in Technical Support Information. Store it
with other Word templates on a PC connected to a laser printer. The latest version includes fields for
warranty period and manufacturing location.
1. Open a new document based on the serial label template.
2. Enter the information from the old serial label, and print the new label on plain white paper. The
new label does not have barcodes.
3. Carefully cut out the new serial label just inside the border and place it into the inner recess in the
bottom case. The bottom of the label goes toward the front of the case.
4. While holding the paper label in place, attach a serial label overlay into the outer recess. It covers
and protects the serial label.
HP OmniBook 6000
HP Serial Number (S)TW711A1234
(1P) F2072 W EA MFG# TW711A1234
Made in Taiwan

Figure 2-20. Example of Serial Number Label

1YR
Removal and Replacement 2-27