Specifications - Classe Audio CA-2300 Owner's Manual

30

Specifications

All tests un-weighted and 500kHz measurement bandwidth (except SNR).
n Frequency response
n Output power
n Harmonic Distortion
n Peak Output Voltage
n Input Impedance
n Voltage gain
n Input level at clipping
n Intermodulation Distortion
n Signal-to-noise ratio
n Output Impedance
n Standby power consumption
n Rated power consumption
n Overall Dimensions
CT-2300 Width (including faceplate): 19" (483mm)
CT-2300 Width (excluding faceplate): 17" (432mm)
CA-2300 Depth (excluding connectors): 17.52" (445mm)
CT-2300 Depth (excluding connectors): 18.625" (473 mm)
n Gross weight
CT-2300: 109lbs (49.5kg)
n Net weight
CT-2300: 89lbs (40.5kg)
n Mains voltage
For more information, see your Classé dealer, or contact:
B&W Group Ltd.
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
Internet: http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of B&W Group Ltd., Worthing U.K. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
Control 4™ is a trademark of Control 4 Corporation of Saltlake City UT. All rights reserved.
1Hz – 80kHz, -3dB
300W rms into 8W (24.8 dBW)
600W rms into 4W (24.8 dBW)
Both channels driven
<0.002% @ 1kHz balanced
<0.004% @ 1 kHz single ended
150V peak to peak, 53V rms no load
136V peak to peak, 48V rms into 8W
50kW balanced / single ended
29 dB balanced / single ended
1.88V rms balanced / single ended
>90dB below fundamental into
8W balanced / single ended
>90dB below fundamental into
4W balanced / single ended
-116dB at peak output into 8W
Measurement Bandwidth: 22kHz
0.015W @ 1kHz
<1W @ 230V
763W @ 1/8th power into 8W
CA-2300 Width: 17.50" (444mm)
CA-2300 Height: 8.78" (223mm)
CT-2300 Height: 6.97" (177mm)
CA-2300: 100lbs (45.36 kg)
CA-2300: 88lbs (39.92 kg)
Specified on rear panel