Option/Configuration Headers; Drive Id/Option Select Header - Seagate ST3620N Product Manual

32
______________________________________________________________________________________
10.0

Option/configuration headers

10.1

Drive ID/option select header

Figures 10.1-1 and 10.1-2 show a bottom view of the drive (PCB toward viewer) for the purpose of showing
the drive ID select and configuration option select jumper connectors. The notes following the figures describe
the functions of the various jumper positions on the 3 connectors J2, J5 and J6. Suggested part number for
the jumpers for J2 is Molex 52747-0211 (Seagate P/N 77679052).
Side View of Drive
Pin 1
[2] J5
A 0 A 1 A 2
SCSI ID = 0
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
*
PCB part number
label here.
Figure 10.1-1. ID and option select header for Models ST31200N/ND and ST3620N
Product Manual - Hawk 1LP Family SCSI-2 (Volume 1), Rev. A
HDA
J1
Drive with HDA up,
PCB down,
viewed from front
Pin 1
HDA
S
L
S
E
A 2 A 1 A 0
P
D
SCSI ID = 0
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
Sync
Spindle
Remote 3
LED
4
Pin 1
End
J6
Drive Front
J6
R
E
S
J2
Jumper
R
E
Positions
S
Reserved
Delay
Motor Start
Enable
Motor Start
Write Protect
Parity Option
Enable
Terminators
Term. Power
from Drive
Term. Power
to SCSI Bus
Term. Power
from SCSI Bus
CATH
SCSI I/O
Connector
Pin 1
J5
[2]
[2]
J1
*
DC Power
Connector
J2
Pin 1
D M W P T T T
S E P E E P P
[3]
[3]
[3]
Position A