HP Compaq nc8000 Maintenance And Service Manual page 168

Power Cord Requirements
3-Conductor Power Cord Requirements (Continued)
Country
United Kingdom
United States
Notes
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
conductor size. Power cord fittings (appliance coupler and wall plug) must
bear the certification mark of the agency responsible for evaluation in the
country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a "T" mark
and registration number in accordance with the Japanese Dentori Law.
The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm
conductor size. The wall plug must be a two-pole grounding type with a
Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
B–4
Accredited Agency
BSI
UL
Applicable Note
Number
1
2
Maintenance and Service Guide
2
2