Do you have a question about the 179cc and is the answer not in the manual?
Questions and answers
jim
January 29, 2025
search for new carb for 752z370-sub
1 comments:
Mr. Anderson
May 14, 2025
A new carburetor for the MTD 179cc model 752Z370-SUB can be found as a replacement part, and an exact replica is available online for approximately $16.
Choose from the options below: ◊ Visit us on the web at www.mtdproducts.com ◊ Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683 ◊ Write us at MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...
Important Safe Operation Practices WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate the equipment. Failure to comply with these instructions may result in personal injury.
Maintenance & Storage Do not overfill fuel tank. Fill tank to no more than 1⁄2 inch below the bottom of the filler neck to allow Keep the engine in safe working order space for fuel expansion. Allow the engine to cool at least five minutes before Replace gasoline cap and tighten it securely.
Safety Symbols This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR’S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING—GASOLINE IS FLAMMABLE Allow the engine to cool at least two minutes before refueling.
Set-Up Oil & Fuel Specifications Checking Oil Level on Engines with Quarter-Turn Oil Fill Caps NOTE: Be sure to check the oil while on a level surface with the NOTE: The engine is shipped without gasoline in the engine. engine stopped. Running the engine with insufficient oil can cause serious engine damage and void the engine warranty.
Page 7
Checking Oil Level on Engines with Threaded Oil Fill Caps Filling Oil Sump NOTE: Be sure to check the oil while on a level surface with the Be sure the engine is upright and level. engine stopped. Remove the oil fill cap dipstick from oil filler tube by To avoid engine damage, it is important to: rotating counter-clockwise and lifting the dipstick out of the engine.
Page 8
Fuel Recommendations CAUTION: Operating the engine with E85 fuel, an oil/gasoline mixture, dirty gasoline, or gasoline over 30 days old that has not been stabilized using a fuel additive, may result in damage to your engine’s carburetor. Subsequent damage would not be Fuel Level Indicator covered under the manufacturer’s warranty.
Controls and Features Throttle Air Filter Oil Fill Fuel Fill Fuel Fill Oil Fill Choke Primer Throttle Choke Oil Drain Starter Button Electric Starter Choke Power Inlet Oil Fill Recoil Starter Handle Starter Button Figure 4-1 Throttle Fuel Shut-Off Valve The throttle control regulates the speed of the engine and will If equipped, is used for controlling the flow of fuel between shut off the engine when it is moved into the stop position.
120V A.C. Three-Wire Power Cord and Plug you authorized MTD Service Dealer. To avoid serious designed to operated on a 120V A.C. household burn injuries or damage to your engine, DO NOT current.
Page 11
If engine does not start after following steps 1 through then into the outlet. 12, contact your Authorized MTD Service Dealer. DO NOT Connect the power cord to the switch box on the engine. attempt to troubleshoot this engine in any other way.
If engine does not start after following steps 1 through Be sure the Fuel Shut-Off Valve, , if present, is off. 11, contact your Authorized MTD Service Dealer. DO NOT attempt to troubleshoot this engine in any other way. 5— O...
Maintenance Maintenance Schedule Each Use or Every Season Every Season Every Season First 5 Hours Service Dates Every 5 Hrs. or 25 Hours or 50 Hours or 100 Hours Check Engine Oil Level Change Engine Oil Check Air Cleaner (If so equipped) Service Air Cleaner (If so equipped) Check Spark Plug Replace Spark Plug...
Page 14
Fill with the recommended Oil, Fig. 6-3. Spark Plug Spark Plug Boot 20w40, 20w50 15w40, 15w50 10w40 10w30 (ºC) -30º -20º -10º 0º 10º 20º 30º 40º (ºF) -20º 0º 20º 40º 60º 80º 100º Figure 6-1 Fig. 6-3 NOTE: DO NOT overfill oil filler. Doing so may result in oil carry-over to the equipment and cause malfunction or damage.
NOT be affected at altitudes up to 7,000 feet (2,134 meters). For after the spark plug seats to compress the washer. When operation at higher elevations, contact your Authorized MTD reinstalling a used spark plug, tighten 1⁄8-1⁄4 turn after the Servicing Dealer spark plug seats to compress the washer.
(if equipped) WARNING! DO NOT pour fuel from the engine or siphon fuel by mouth. Contact your Authorized MTD Servicing Dealer for alternator related electrical problems such as: • Inoperative Starter Drain fuel into an approved red gasoline container, being careful to avoid spilling.
NOTE: Oil Cylinder Bore If engine fuel is to be stored for more than one season, without gasoline stabilizer, it will gradually deteriorate. Also, if WARNING! When lubricating cylinder bore, fuel it is stored in the engine’s gas tank without gasoline stabilizer it may spray from the spark plug hole.
Page 18
Off-Season Storage CAUTION: Failure to use a fuel stabilizing additive or completely run the engine until it’s out of fuel before off-season storage may result in damage to your engine’s carburetor. Subsequent damage would not be covered under the manufacturer’s warranty.
Troubleshooting Problem Cause Remedy Engine Fails to start Engine flooded Wait at least 10 minutes before starting Spark plug wire disconnected Connect wire to spark plug Fuel tank empty or stale fuel Fill tank with clean, fresh gasoline Engine not choked Choke engine Faulty spark plug Clean, adjust gap or replace...
Any warranted part that is not scheduled for replacement as required maintenance in the written instructions supplied, is warranted for the warranty period stated above. If the part fails during the period of warranty coverage, the part will be repaired or replaced by MTD Consumer Group Inc according to subsection (4) below.
Page 22
WARRANTED PARTS: The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if MTD Consumer Group Inc demonstrates that the outdoor equipment engine has been abused, neglected, or improperly maintained, and that such abuse, neglect, or improper mainte- nance was the direct cause of the need for repair or replacement of the part.
LEA Y RESPETE TODAS LAS NORMAS DE SEGURIDAD E INSTRUCCIONES INCLUIDAS EN ESTE MANUAL ANTES DE PONER EN FUNCIONAMIENTO ESTA MÁQUINA. SI NO RESPETA ESTAS INSTRUCCIONES PUEDE PROVOCAR LESIONES PERSONALES. MTD LLC. APARTADO POSTAL 361131 CLEVELAND, OHIO 44136-0019 Impreso en Estados Unidos de América...
Page 24
Elija entre las opciones que se presentan a continuación: ◊ Visite nuestro sitio web en www.mtdproducts.com ◊ Llame a un representante de Asistencia al Cliente al (800) 800-7310 ó (330) 220-4683 ◊ Escríbanos a MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...
Medidas importantes de seguridad ¡ADVERTENCIA! La presencia de este símbolo indica que se trata de instrucciones de seguridad importantes que debe respetar para evitar poner en riesgo su seguridad personal y/o material y la de los demás. Lea y siga todas las instrucciones de este manual antes de poner en funcionamiento este equipo.
Page 26
Mantenimiento y Almacenamiento No llene en exceso el tanque de combustible. Cargue el depósito hasta que el combustible llegue Mantenga el motor en condiciones seguras de a 1⁄2 pulgada por debajo de la base del cuello de funcionamiento. llenado para dejar espacio para la expansión del Deje que motor se enfríe por lo menos cinco minutos antes combustible.
Símbolos De Seguridad Esta página representa y describe la seguridad los símbolos que pueden parecer en este producto. Lea, comprenda, y siga todas instrucciones en la máquina antes procurar para reunir y operar. Símbolo Descripción LEA EL MANUAL(S) DEL OPERADOR Lea, comprenda, y siga todas instrucciones en el manual (manuales) antes procurar para reunir y operar ADVERTENCIA—...
Configuración Especificaciones para el aceite y el combustible Control del nivel de aceite en los motores que tiene tapones de llenado de aceite de un cuarto de giro NOTA: El motor se despacha sin gasolina ni aceite en su interior. Si se hace funcionar el motor sin suficiente aceite puede dañarse NOTA: Asegúrese de comprobar el aceite sobre una superficie gravemente y se anula la garantía.
Page 29
Control del nivel de aceite en los motores que tiene tapones de Carga del cárter de aceite llenado de aceite a rosca Asegúrese de que el motor está vertical y nivelado. NOTA: Asegúrese de comprobar el aceite sobre una superficie Extraiga el tapón de llenado/la varilla de medición del nivelada y con el motor apagado.
Page 30
¡ADVERTENCIA! una fuente de encendido hasta que los vapores del La gasolina es sumamente combustible hayan desaparecido. inflamable y bajo determinadas condiciones es explosiva. Compruebe que la válvula de paso del combustible, si está incluida, esté abierta. • Cargue combustible en un área bien ventilada y con el motor apagado.
Controles y Características Estrangulador Filtro de aire Silenciador Llenado de aceite Recarga de combustible Recarga de Llenado combustible Acelerador de aceite Cebador Llave Acelerador Estrangulador Drenaje del aceite Carburant robinet Botón d'arrêt arrancador Silenciador Arrancador eléctrico Estrangulador Entrada de Llenado de aceite potencia Arrancador de retroceso Mando...
120 V CA y está incluidas en este manual, comuníquese con el diseñado para operar con corriente doméstica de distribuidor de servicio MTD autorizado. Para evitar 120V CA. Se lo debe poner a masa adecuadamente en lesiones graves por quemadura o daños al motor,...
Page 33
Si el motor no arranca después de realizar los pasos hasta la posición “Fast (rápido)”. 1 a 12, comuníquese con el distribuidor de servicio MTD autorizado. NO intente detectar los problemas de este Coloque el control del estrangulador en la posición motor de ninguna otra manera.
Page 34
Si el motor no arranca después de realizar los pasos embrague del freno, si está incluido (consulte el Manual del 1 a 11, comuníquese con el distribuidor de servicio MTD operador del equipo)). autorizado. NO intente detectar los problemas de este motor de ninguna otra manera.
Mantenimiento Programa de mantenimiento Cada tempo- Cada tempo- Primeras Cada uso o rada o cada rada o cada Fechas de Mantenimiento 5 horas cada 5 horas. 25 horas 100 horas Inspeccione el nivel de aceite del motor Cambie el aceite del motor Verifique el depurador de aire (si viene equipado) servicio del depurador de aire (si viene equipado) Inspeccione las bujías de encendido...
Page 36
Drene el aceite en un recipiente de aceite reciclable aprobado. NOTA: Elimine el aceite del motor usado de la manera que sea compatible con el medio ambiente. Sugerimos que lo coloque en un recipiente sellado y lo lleve a la estación de servicio local para su recuperación.
Page 37
Retirez le bouchon de remplissage d’huile / jauge. Si le Controle que la arandela de la bujía esté en buen estado. niveau est bas, ajouter lentement l’huile jusqu’à ce que le Enrosque la bujía a mano para evitar que se enrosque niveau d’huile entre les registres de hauteur (H) et bas (L), cruzada.
Page 38
Sección sobre operación NO realice ningún ajuste del motor. Los ajustes de fábrica son del presente manual. satisfactorios para la mayoría de las condiciones. Si los ajustes se necesitan, comuníquese con el Distribuidor de servicio de MTD Transporte del motor autorizado. ¡ADVERTENCIA!
Page 39
• Carburador encendido como calentadores de agua, calefactores, secadores • Culata de ropa, motores eléctricos, etc. La extracción de los residuos asegura que el enfriamiento sea NOTA: En lugar de utilizar un producto conservante/estabilizador adecuado, la velocidad del motor correcta y el riesgo de incendio del combustible, puede vaciar el tanque de combustible como menor.
Page 40
Almacenamiento fuera de temporada Cubra el orificio de la bujía con un trapo para evitar que se salpique combustible desde dicho orificio cuando se tira de PRECAUCIóN: la cuerda de arranque. Si no se utiliza un aditivo estabilizador del combustible o si no se hace NOTA: para los motores que están equipados con un funcionar el motor hasta que se agote arrancador de retroceso, prosiga con el Paso 5.
Solución de Problemas Problema Causa Solución El motor no arranca Motor ahogado Aguarde al menos diez minutos antes de encender el motor Se ha desconectado el cable de la bujía Conecte el cable a la bujía El tanque de combustible está vacío o el combustible es viejo Llene el tanque con gasolina limpia y fresca El motor no está...
Inc no podrá denegar el cumplimiento de la garantía únicamente por la falta de los recibos. Como propietario del motor de equipos de exteriores, usted debe saber que MTD Consumer Group Inc. puede denegar la cobertura de la garantía si su motor o una pieza del mismo fallan debido a uso incorrecto, negligencia, mantenimiento indebido o a modificaciones no aprobadas.
Page 44
No se podrán usar piezas adicionales ni modificadas que no estén exentas de acuerdo con el Departamento de los Recursos del Aire (Air Resources Board). El uso de cualquier pieza adicional o modificada no exenta por el comprador final será causal de invalidez de los reclamos bajo garantía. MTD Consumer Group Inc no tendrá...
Need help?
Do you have a question about the 179cc and is the answer not in the manual?
Questions and answers
search for new carb for 752z370-sub
A new carburetor for the MTD 179cc model 752Z370-SUB can be found as a replacement part, and an exact replica is available online for approximately $16.
This answer is automatically generated