Power Management Setup Page - ECS motherboard User Manual

Power Management Setup Page

This page sets some parameters for system power management
operation.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
ACPI Aware O/S
Power Management
Suspend Time Out
Resume On RTC Alarm
Keyboard Power On
LAN/Ring Power On
↑↓←→ : Move
F1: General Help
This item supports ACPI (Advanced
ACPI Aware
O/S Configuration and Power management
Interface). Use this item to enable or disable
the ACPI feature.
Power Use this item to enable or disable a power
Management management scheme. If you enable power
management, you can use the items below
to set the power management operation.
Both APM and ACPI are supported.
This item sets up the timeout for Suspend
Suspend Time
Out mode in minutes. If the time selected passes
without any system activity, the computer
will enter power-saving Suspend mode.
Resume On The system can be turned off with a
RTC Alarm software command. If you enable this item,
the system can automatically resume at a
fixed time based on the system's RTC
(realtime clock). Use the items below this
one to set the date and time of the wake-up
alarm. You must use an ATX power supply
in order to use this feature.
Keyboard If you enable this item, system can
Power On automatically resume by pressing any keys,
power keys or hot keys on the keyboard or
Power Management Setup
Yes
Enabled
Disabled
Disabled
Disabled
Disabled
Enter: Select +/-/: Value F10: Save Esc: Exit
F9: Optimized Defaults
26
Help Item