Hardware Monitor Page; Load Optimal Defaults - ECS Motherboard User Manual

Hardware Monitor Page

This page sets up some parameters for the hardware monitoring
function of this motherboard.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
-=- System Hardware Monitor-=-
Vcore
Vdimm
Vivdd
Vcc5V
SB3V
VBAT
CPU FAN Speed
SYSTEN FAN Speed
CPU Temperature
SYSTEM Temperature
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help
CPU/System Temperature
These items display CPU and system temperature measurement.
FANs & Voltage Measurements
These items indicate cooling fan speeds in RPM and the various
system voltage measurements.

Load Optimal Defaults

If you select this item and press <Enter> a dialog box appears. If
you select [OK], and then press <Enter>, the Setup Utility loads
a set of fail-safe default values. These default values are not very
demanding and they should allow your system to function with
most kinds of hardware and memory chips.
Chapter 3: BIOS Setup Utility
Hardware Monitor Setup
: 1.280 V
: 2.576 V
: 1.520 V
: 4.954 V
: 3.184 V
: 3.184 V
: 4440 RPM
: 0 RPM
: 72 C/161 F
o o
: 32 C/89 F
o o
F9: Optimized Defaults
37
Help Item