Features Setup Page - ECS Motherboard User Manual

Motherboard User's Guide

Features Setup Page

This page sets up some parameters for peripheral devices
connected to the system.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
OnBoard Floppy Controller
Serial Port1 Address
OnBoard IR Port
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
OnBoard PCI IDE Controller
OnBoard SATA-IDE
Audio Device
Modem Device
Ethernet Device
OnBoard USB Function
USB Function For DOS
: Move
F1: General Help
OnBoard Floppy Controller
Use this item to enable or disable the onboard floppy disk drive
interface.
Serial Port1 Address
Use this item to enable or disable the onboard COM1 serial port,
and to assign a port address.
Onboard IR Port
Use this item to enable or disable the onboard IR port function.
Parallel Port Address
Use this item to enable or disable the onboard Parallel port, and
to assign a port address.
Parallel Port Mode (ECP)
Use this item to select the parallel port mode. You can select
Normal (Standard Parallel Port), ECP (Extended Capabilities
Features Setup
Enabled
3F8/IRQ4
Disabled
378
ECP
DMA3
IRQ7
Both
Enhanced
Enabled
Auto
Enabled
Enabled
Disabled
Enter: Select +/-/: Value F10: Save Esc: Exit
F9: Optimized Defaults
30
Help Item
Allows BIOS to
Enable or Disable
Floppy Controller.