ECS Motherboard User Manual page 46

Motherboard User's Guide
forms. It provides you a faster transfer rate of 150 MB/s. If you
have installed a Serial ATA hard drive, you can connect the Serial
ATA cables to the Serial ATA hard drive or the connecter on the
motherboard.
On the motherboard, locate the Serial ATA connectors SATA1-2,
which support new Serial ATA devices for the highest data
transfer rates, simpler disk drive cabling and easier PC assembly.
It eliminates limitations of the current Parallel ATA interface, but
maintains register compatibility and software compatibility with
Parallel ATA.
Analog Audio Input Header
If you have installed a CD-ROM drive or DVD-ROM drive, you
can connect the drive audio cable to the onboard sound system.
1
CD1
When you first start up your system, the BIOS should automati-
cally detect your CD-ROM/DVD drive. If it doesn't, enter the
Setup Utility and configure the CD-ROM/DVD drive that you
have installed. On the motherboard, locate the 4-pin header CD1.
Pin Signal
1 CD IN L
2 GND
3 GND
4 CD IN R
22